quilts for pulse: heart rainbow quilt in progress

OK, so I went to town.  I sliced the selvages off all my fabrics for the heart quilt.  Hopefully these will combine for a cool/modern heart that I can use as the 49th heart on the back. 

I sliced a bunch of "low volume" whites (3 different light beige-y ones) into 2 inch strips & 5 & 1/2 inch strips.  I took the strips and sliced the into squares (2 inches & 5 & 1/2 inch squares. 

I sliced each of my 6 rainbow colors into 5 & 1/2 inch strips... and then sliced each strip into 10 & 1/2 inches again, so from each 45 inch width of fabric, I got 4 strips at 5 & 1/2 inches by 10 & 1/2 inches (that's 4 times 10 & 1/2 to equal 42 inches)... it was VERY lucky that the fabrics were about exactly 45 inches wide and the selvages were not wider than 1 & 1/2 inches, because two selvages at 1 & 1/2 inches each brought me RIGHT UP to the edge of being able to slice 4 colored heart pieces out of each strip.  (It was not expensive fabric, so some of hte selvages were a little wider than I'm used to seeing, with the information printed quite far onto the edge of the fabric). 

 These are the selvages, in a baggie to keep them from getting scattered while I work on the rest of the project

Here are the background blocks, waiting to be sewn onto the heart halves


Here are the heart halves, piled up in rainbow order (ROYGBV) and awaiting their turn at the sewing machine:


Here is a heart block after the white pieces are sewn to the heart block halves (can you see the heart yet?  Look at the diagonal seams across each of the white parts):


And HERE is a heart block, white background parts finger-pressed into place.  NOW you can see the heart, right?:


OK. so I've got 47 more to finish.  After I get them piled up with all the white parts sewn on, I'll slice off the excess fabric (in this last photo, under the white parts), and clip the stray threads, and press them properly.  To press each of these, I'll have to fold under hte red part and press both sides towards the heart.  To press the heart seam towards the low-volume white side would be to risk it showing up through the white fabric in the finished quilt. 

UNLIKE in seamstress sewing, when you do most quilting, you press both sides of a seam towards the darker fabric (in general, there are some exceptions).  You do NOT separate the fabrics and press them open.  In sewing clothing, we want the smallest possible layer of fabric between the body and the top layer.  We also want the seam to ease over curves of the body, gracefully.  Open seams are the way to do it.  In quilting, we want the seam to take wear & tear of GENERATIONS worth of being lovingly used every night as a blanket.  And we do not want the slightest possibility of exposing the threads between the fabric.  So we press the seam allowance to the side rather than opening it.  It's harder to pull apart with rough use, if it's pressed to the side and the FABRIC is holding itself together, than if it's pressed open and the only thing holding it together is the little bitty piece of thread.  AND because we use many colors in most quilts, we want to make the least possible opportunities for the colors to show through each other, which is why we press them towards the darker fabric. 

Next post will have most of the blocks finished and I'll have pictures of how to clean up the block, trim the excess fabric, and press it.